Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide will illustrate the steps to remove and replace the front brake pads on the Harley Davidson Sportster Iron 883. First, place the motorcycle on a stand and start unscrewing the bolts securing the front brake caliper to remove it; then, leverage the caliper piston to retract it, removing the old pads as shown in the video. At this point, clean the caliper of any residual dirt, install the new high-quality brake pads; then reattach the brake caliper!

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Harley Davidson Sportster Iron 883?
How to Replace the Rear Brake Pads on a Harley Davidson Sportster Iron 883?
Sportster Iron 883 To replace the rear brake pads on the Harley Davidson Sportster Iron 883, loosen the screws securing the rear brake caliper, located immediately next…
How to Replace the Brake Pads on a Harley Davidson Sportster 883
How to Replace the Brake Pads on a Harley Davidson Sportster 883
Sportster Iron 883 In today's tutorial video, you will learn how to disassemble and replace the front brake pads on a Harley Davidson Sportster 883 Iron in simple steps…
How do you replace the rear brake pads on the Harley Davidson Sportster Iron?
How do you replace the rear brake pads on the Harley Davidson Sportster Iron?
Sportster Iron 883 It will be possible to replace the rear brake pads of the Harley Davidson Sportster Iron by loosening the screws that hold the brake caliper to the r…

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos