Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To clear error codes on a Harley Davidson, turn on the ignition without starting the engine and simultaneously hold down the control buttons on the handlebars (or the trip button on the speedometer, depending on the model) until the diagnostic screen appears. Scroll through the categories with the trip button and select the one with the error codes. Once the code is displayed, press and hold the button again until it is cleared. Repeat for each error, then turn off and restart the bike to check that they do not reappear. If the problem persists, it is best to check or consult a mechanic.

Posted on 27 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a Harley Davidson
How to reset the service light on a Harley Davidson
Harley Resetting the service light on a Harley Davidson is a very simple and quick operation, especially on newer models that have a dashboard computer capa…
How to replace the battery in a Harley-Davidson remote control?
How to replace the battery in a Harley-Davidson remote control?
Harley In this tutorial, we will see how to replace the battery of a Harley-Davidson remote control, a task that is extremely simple and quick. To do this, …
How to reset the service light on the Harley Davidson
How to reset the service light on the Harley Davidson
Harley The service light reset on the Harley Davidson follows a simple and quick procedure to be carried out independently. To reset the light, we must turn…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos