Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Here is the answer to our question regarding how to program the PIN code of a Harley Davidson motorcycle transponder. This operation usually aims to replace the code for security reasons. Here’s what to do: turn the ignition on and off three times, then do the same with the left indicator three times and repeat with the right indicator. At this point, you will see the current code, which can be modified using the left indicator, digit by digit, and confirmed with the right indicator.

Posted on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Harley Davidson key
How to replace the battery of the Harley Davidson key
Harley Today we will explain how to replace the battery of a Harley Davidson key. To perform this operation, you will need a flathead screwdriver or a coin,…
How to reset the service light on a Harley Davidson
How to reset the service light on a Harley Davidson
Harley Resetting the service light on a Harley Davidson is a very simple and quick operation, especially on newer models that have a dashboard computer capa…
How to reset the service light on the Harley Davidson
How to reset the service light on the Harley Davidson
Harley The service light reset on the Harley Davidson follows a simple and quick procedure to be carried out independently. To reset the light, we must turn…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos