Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp on a Harley-Davidson Road King?

Model: Harley Davidson Road King
Part: Headlight

Video tutorial

In this tutorial, see how to replace the front headlamp on a Harley-Davidson Road King, a very simple and quick operation. First, ensure that the instrument cluster is off for safety, then locate the screw at the bottom of the headlamp and undo it using a cross-head screwdriver.

Next, remove the outer trim, unscrew any additional screws that are now exposed, and separate the headlamp from the base. Finally, disconnect the power connector, attach the replacement, and reassemble everything by following the reverse procedure.


Posted on 28 March 2026 by ScegliAuto


Related tutorials

How do you replace the headlight bulb of the Harley Davidson Road King?
How do you replace the headlight bulb of the Harley Davidson Road King?
Road King .. To replace the headlight bulb on the Harley Davidson Road King, you need to loosen the screw located at the bottom of the chrome trim around the.. …
How to Replace the Front Headlamp in the Harley-Davidson Road King?
How to Replace the Front Headlamp in the Harley-Davidson Road King?
Road King .. Replacing the front headlamp in the Harley-Davidson Road King, as shown in this tutorial, is an extremely simple and quick task. First, ensure that.. …
How to Install Heated Grips on Harley Davidson Road King
How to Install Heated Grips on Harley Davidson Road King
Road King .. learn how to install heated grips on the Harley Davidson Road King in simple and quick steps. First, disconnect the battery; then remove the front headlamp.. …

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos