Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Replacing the front headlamp in the Harley-Davidson Road King, as shown in this tutorial, is an extremely simple and quick task. First, ensure that the key is not in the ignition for safety. Then, locate the screw on the lower outer area of the headlamp and unscrew it with a standard cross-head screwdriver. Next, remove the chrome ring, separate the headlamp from the base, and disconnect the power connector. At this point, connect the replacement part and reassemble everything by following the reverse procedure.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight and Bulb on a Harley Davidson Road King
How to Replace the Headlight and Bulb on a Harley Davidson Road King
Road King .. and replace the headlight and bulb on a Harley Davidson Road King, following these simple steps. First, remove the front headlight by unscrewing the.. …
How to Replace the Front Headlamp on a Harley-Davidson Road King?
How to Replace the Front Headlamp on a Harley-Davidson Road King?
Road King .. how to replace the front headlamp on a Harley-Davidson Road King, a very simple and quick operation. First, ensure that the instrument cluster is off.. …
How to Replace the Headlight Bulb on a Harley Davidson Road King
Road King .. To replace the headlight bulb on a Harley Davidson Road King, loosen the screw located at the bottom of the chrome trim surrounding the headlight... …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos