Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air Filter Replacement for Harley Davidson V-Rod

Model: Harley Davidson V Rod
Part: Air filter

Video tutorial

Descriptive guide for replacing the air filter on a Harley Davidson V-Rod. Obtain an air filter 10050533. Position the bike on its side stand. This bike does not have a classic tank; instead, there is a cover that acts as a fake tank to conceal the air filter.

Using a 3mm Allen key, undo the screws securing the two side fairings located in front of the tank cover. Lift the seat (book-style opening) and undo the ring screw of the tank cover.

Lift the cover, disconnect the connector located in the slot in front of the air box cover. Release the side clips and lift the cover.

Replace the air filter, ensuring the correct orientation. Reassemble everything as per disassembly.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs of the Harley Davidson V Rod?
How to Replace the Spark Plugs of the Harley Davidson V Rod?
V Rod In this guide, you will find instructions on how to remove and replace the spark plugs of the Harley Davidson V Rod. First, place the motorcycle on a…
How to Perform an Oil Change on Harley Davidson V-Rod
How to Perform an Oil Change on Harley Davidson V-Rod
V Rod In this video tutorial, we will see the steps to replace the engine oil and oil filter on a Harley Davidson V-Rod. First, place your motorcycle on a …
How to check the cooling system of the Harley Davidson V Rod
How to check the cooling system of the Harley Davidson V Rod
V Rod Today's instructions will show you the steps to check the operation of the cooling system of the Harley Davidson V Rod engine. First, check the coola…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos