Do it yourself
Frequently asked questions about cars and motorcycles
In this video tutorial, you will learn how to remove the engine temperature sensor on a Harley Davidson. First, unscrew the nuts located on the tubular frame to remove the cover. Then, disconnect the radiator hose and let all the coolant drain; unscrew the temperature sensor using a spanner. Fit the new one by screwing it in by hand first, then tighten with the spanner. Reconnect the electrical connector and the radiator hose, and pour in the new coolant.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Electra Glide Before starting, position your Harley Davidson Electra Glide vertically, and if possible, lift it to work more comfortably on the front fender. Begin…
Electra Glide Remove the air filter from a Harley Davidson Electra Glide motorcycle. Follow this guide to proceed with the replacement. Position the motorcycle on …
Electra Glide Removing the engine air filter on a Harley Davidson Electra Glide. Follow this guide to replace it. Position the motorcycle on a central stand, and u…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos