Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Unscrew the four screws securing the round air filter cover, then unscrew the screws behind the circular frame and the three screws of the outer support, and remove everything as shown in the video. Now that you can remove the entire air filter housing, disassemble it by simply unscrewing all the screws that hold it. Open it and replace the worn parts, including the filter. Reassemble everything in reverse order, putting the housing back together and screwing in all the screws, then mount it back on the bike and screw it in place, again in reverse order. This is a straightforward maintenance task, although it may take some time.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Carburettor from the Harley Davidson Dyna
How to Remove the Carburettor from the Harley Davidson Dyna
Dyna Next, we will discover the instructions that will allow us to remove and replace the carburettor of the Harley Davidson Dyna. First, place the motorc…
How do you replace the air filter on the Harley Davidson Dyna?
How do you replace the air filter on the Harley Davidson Dyna?
Dyna The procedure for replacing the air filter on the Harley Davidson Dyna involves loosening the screws that secure the cover located on the right side …
How to Replace the Air Filter on a Harley Davidson Dyna?
How to Replace the Air Filter on a Harley Davidson Dyna?
Dyna To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel …

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos