Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before you begin, position your Harley Davidson Electra Glide upright using a motorcycle stand, start the engine and let it run for a few minutes. Start by placing a container under the oil sump, then loosen and remove the lower oil drain plug to allow the engine oil to drain out. Next, reattach the drain plug and unscrew the upper filler cap. At this point, add the new engine oil, then refit the filler cap. Once you have refitted the cap, the oil change is complete.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Harley-Davidson Electra Glide?
How to Change the Engine Oil in a Harley-Davidson Electra Glide?
Electra Glide In this tutorial, you will learn how to change the engine oil in a Harley-Davidson Electra Glide, a very simple and quick operation. First, wait unti…
How do you replace the motor oil of the Harley Davidson Electra Glide?
How do you replace the motor oil of the Harley Davidson Electra Glide?
Electra Glide The procedure for replacing the motor oil in the Harley Davidson Electra Glide involves loosening the drain plug of the oil pan located in the centra…
How to Change the Engine Oil in a Harley-Davidson Electra Glide?
How to Change the Engine Oil in a Harley-Davidson Electra Glide?
Electra Glide In this tutorial, you will see how to change the engine oil in a Harley-Davidson Electra Glide, a very simple and quick operation to perform every 12…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos