Do it yourself
Frequently asked questions about cars and motorcycles

Model: Harley Davidson Dyna
Part:

In today’s tutorial, you will learn how to remove and replace the front brake lever, as well as the clutch lever, on various Harley Davidson models, including the Dyna. To remove the front brake lever, take out the central fixing pin by removing the retaining ring found under the lever; then slide the pin upwards, as shown in the video. At this point, you can detach and remove the front brake lever, replacing it with a new one; simply install the new one of the correct type by applying the reverse procedure of disassembly!

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dyna This guide provides instructions for removing and replacing the front wheel of the Harley Davidson Dyna motorcycle, following these simple steps. Fir…
Dyna You can replace the front brake pads on a Harley Davidson Dyna by loosening the screws that secure the brake caliper to its housing, near the front b…
Dyna To replace the front brake pads of the Harley Davidson Dyna, you will need to loosen the screws that secure the brake caliper to the corresponding di…

How do you replace the exhaust pipe of the GasGas MC 85?

In order to replace the exhaust pipe of the GasGas MC 85, you need to loosen the screws that secure the side panel of the motorcycle, located near the fender. Once the fixing screws have been unscrewed, it will be possible to completely remove the panel so that you have access to the exhaust pipe underneath. This can now be freed from the fixing screws and the clamp attached to the manifold; once the old exhaust pipe has been removed, it can be completely detached so that the new one can be inserted, making sure that everything is functioning properly.

Watch the video!


by ScegliAuto

More videos