Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide outlines the steps to remove and replace the rear brake pads on a Harley Davidson Softail motorcycle. First, unscrew the bolts of the rear brake caliper using a 10 mm socket spanner. Then, rotate the disc to slide out the old brake pad completely, as shown in the video. Next, clean the caliper of any dirt and install the new brake pads; rotate the disc in the opposite direction to insert it into the caliper, finally securing the bolt!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Pads on the Harley Davidson Softail
Replacing the Rear Brake Pads on the Harley Davidson Softail
Softail Follow this guide for the main instructions on how to remove and replace the rear brake pads on the Harley Davidson Softail motorcycle, using these s…
How to Replace the Brake Pads on a Harley Davidson Softail
How to Replace the Brake Pads on a Harley Davidson Softail
Softail To replace the brake pads on a Harley Davidson Softail, perform the same operation for both the front and rear calipers: once the calipers are detach…
Replacing the brake pads on the Harley Davidson Softail
Replacing the brake pads on the Harley Davidson Softail
Softail Today's guide will show you the steps to remove and replace the front and rear brake pads on the Harley Davidson Softail. First, place the motorcycle…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos