Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wheel of the Harley Davidson Ultra?

Model: Harley Davidson Ultra
Part: Wheel

Video tutorial

To remove the front wheel of the Harley Davidson Ultra, you need to loosen the bolts securing the front brake caliper. Once the caliper is removed from the disc, you can unscrew all the bolts holding the central axle of the wheel.

Next, you will also need to loosen the nut that secures the axle so that it can be removed. By pulling out the axle, the wheel can be completely removed and replaced with a new spare part.

The new wheel should be inserted using the appropriate axle, which must be secured with the corresponding bolts and nut.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Harley Davidson Ultra?
How to Replace the Battery of the Harley Davidson Ultra?
Ultra To replace the battery of the Harley Davidson Ultra, first detach the seat by removing it from the respective clips located underneath. Once the seat…
How do you replace the headlight bulb of the Harley Davidson Ultra Classic?
How do you replace the headlight bulb of the Harley Davidson Ultra Classic?
Ultra In order to replace the headlight bulb of the Harley Davidson Ultra Classic, you need to remove the chrome trim around the corresponding front headli…
How to Replace the Coolant in a Harley Davidson Ultra
How to Replace the Coolant in a Harley Davidson Ultra
Ultra In this brief and simple guide, you will find instructions to drain and replace the coolant in a Harley Davidson Ultra motorcycle. First, place your …

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos