Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Follow these instructions to remove and replace the fuel filter on the Harley Davidson Dyna motorcycle. First, place the bike on a stand and start unscrewing the screws securing the fuel cap, then remove the cover; disconnect the electrical connector and detach the fuel line, as shown in the video. Next, remove the old fuel filter and replace it with the correct new one; insert it properly onto the fuel line and refit the fuel cap with its screws, following the video tutorial to the end!

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Harley Davidson Dyna?
How to Replace the Air Filter on a Harley Davidson Dyna?
Dyna To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel …
How do you replace the air filter on the Harley Davidson Dyna?
How do you replace the air filter on the Harley Davidson Dyna?
Dyna The procedure for replacing the air filter on the Harley Davidson Dyna involves loosening the screws that secure the cover located on the right side …
How to Change the Engine Oil on the Harley Davidson Dyna?
How to Change the Engine Oil on the Harley Davidson Dyna?
Dyna You can change the engine oil on the Harley Davidson Dyna by loosening the drain plug located at the bottom centre of the oil sump: once the plug is …

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos