Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Chevrolet Captiva - Car stereo

Chevrolet Captiva (2006-2016 / CG)
How to remove the car stereo on Holden Captiva
If we need to disassemble the standard car radio on this car because perhaps we intend to replace it with a more performing one, we can follow the instructions …read all…
Posted on 25 April 2023 by ScegliAuto
Chevrolet Captiva (2006-2016 / CG)
How to disassemble the stock car radio of the Holden Captiva
Let's see in this short and simple guide the steps on how to disassemble and replace the stock car radio of the Holden Captiva. First we get on board the car …read all…
Posted on 19 June 2022 by ScegliAuto
Car stereo (2) Key (1) Checks and maintenance (4) Headlight (1) Air filter (3) Cabin air filter (4) Diesel filter (1) Headlight bulb (1) Handle (2) Engine oil (1) Instrument cluster (5) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos