Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Holden Captiva

Model: Chevrolet Captiva CG - Years 2006-2016
Part: Car stereo

If you need to remove the factory radio from this vehicle because you plan to replace it with a more powerful one, follow the instructions in this video and the description below. First, access the cabin and obtain the special keys to extract the radio, which you will insert into the four holes located on the sides of the radio itself. Then, pull all four keys simultaneously towards you to extract the radio from the slot. Be careful during extraction due to the presence of the cables behind.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Stock Radio from Holden Captiva
How to Remove the Stock Radio from Holden Captiva
Chevrolet Captiva (2006-2016 / CG) Let's go through this short and simple guide on the steps to remove and replace the stock radio from the Holden Captiva. First, get inside the vehicl…
Where to Find the Fuse Box of the Holden Captiva
Where to Find the Fuse Box of the Holden Captiva
Chevrolet Captiva (2006-2018 / CG) If you don't know where the fuse box containing all the various fuses of your Holden Captiva is located, don't worry. Just read the following guide c…
How to Replace the Cabin Air Filter in a Holden Captiva?
How to Replace the Cabin Air Filter in a Holden Captiva?
Chevrolet Captiva (2006-2018 / CG) To replace the cabin air filter in a Holden Captiva, open the glove compartment located on the passenger side: this will allow you to detach the reta…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos