Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stock Radio from Holden Captiva

Model: Chevrolet Captiva CG - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Car stereo

See other generations:
Video tutorial

Let's go through this short and simple guide on the steps to remove and replace the stock radio from the Holden Captiva. First, get inside the vehicle and start by removing the side plastic covers using thin levers.

Then, remove the air vents as shown in the video. At this point, unscrew the mounting screws of the radio and disconnect the electrical connectors at the back; then, remove the original radio and, if necessary, replace it with the new one, applying the reverse procedure for reassembly!


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Holden Captiva
How to Remove the Radio from a Holden Captiva
Chevrolet Captiva (2006-2016 / CG) If you need to remove the factory radio from this vehicle because you plan to replace it with a more powerful one, follow the instructions in this vi…
Where to Find the Fuse Box of the Holden Captiva
Where to Find the Fuse Box of the Holden Captiva
Chevrolet Captiva (2006-2018 / CG) If you don't know where the fuse box containing all the various fuses of your Holden Captiva is located, don't worry. Just read the following guide c…
How to Replace the Exterior Door Handle on the Holden Captiva
How to Replace the Exterior Door Handle on the Holden Captiva
Chevrolet Captiva (2006-2016 / CG) In this brief guide, discover how to remove and replace the exterior door handle on the Holden Captiva in simple and quick steps. First, open the fro…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos