Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Holden Captiva
    4. : Checks and maintenance

Chevrolet Captiva - Checks and maintenance

Chevrolet Captiva (2006-2018 / CG)
Where is the oil drain plug located on the Chevrolet/Holden Captiva?
In this video, we see where the oil drain plug of a Chevrolet/Holden Captiva CG series is located. To easily access the drain plug, it is necessary to lift the …read all…
Posted on 30 December 2023 by ScegliAuto
Chevrolet Captiva (2006-2016 / CG)
How to replace a Holden Captiva gearbox cover
As seen in the video if you want to change the automatic gearbox cover in a Holden Captiva car you will have to unscrew the gearbox cap and remove it. Then …read all…
Posted on 2 December 2022 by ScegliAuto
Chevrolet Captiva (2006-2018 / CG)
How to reset the service in the Holden Captiva?
Resetting the Holden Captiva service, as we can see in this tutorial, is an extremely simple and fast operation. Before doing so, we must have completed all …read all…
Posted on 2 August 2022 by ScegliAuto
Chevrolet Captiva (2006-2018 / CG)
How to reset the oil service in the Holden Captiva?
In this tutorial we can see how to reset the oil service in the Holden Captiva, an extremely simple and fast operation, to be carried out only after completing …read all…
Posted on 27 May 2022 by ScegliAuto
Car stereo (2) Key (1) Checks and maintenance (4) Headlight (1) Air filter (3) Cabin air filter (4) Diesel filter (1) Headlight bulb (1) Handle (2) Engine oil (1) Instrument cluster (5) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos