Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Holden Captiva
    4. : Cabin air filter

Chevrolet Captiva - Cabin air filter

Cabin Air Filter Chevrolet Captiva (2006-2018 / cg)

Chevrolet Captiva (2006-2018 / CG)
How to Change the Air Filter on the Holden Captiva
If you need to replace the cabin air filter on this vehicle model, the following description provides the instructions and procedure for the correct …Read all…
Posted on 26 July 2026 by ScegliAuto
Chevrolet Captiva (2006-2018 / CG)
How to Replace the Cabin Filter in the Holden Captiva?
Replacing the cabin filter in the Holden Captiva is very simple. First, go to the passenger seat, then open the glove compartment and remove the three screws …Read all…
Posted on 14 August 2026 by ScegliAuto
Chevrolet Captiva (2006-2018 / CG)
How to Replace the Cabin Air Filter in a Holden Captiva?
To replace the cabin air filter in a Holden Captiva, open the glove compartment located on the passenger side: this will allow you to detach the retaining …Read all…
Posted on 2 August 2026 by ScegliAuto
Chevrolet Captiva (2006-2018 / CG)
How to Replace the Cabin Air Filter on the Holden Captiva
To proceed with the replacement of the cabin air filter in the vehicle, follow these steps: access the cabin from the passenger side, open the glove …Read all…
Posted on 9 July 2026 by ScegliAuto
Car stereo (2) Key (1) Checks and maintenance (2) Headlight (1) Air filter (3) Cabin air filter (4) Diesel fuel filter (1) Headlight bulb (1) Handle (2) Engine oil (1) Fuse box (2) Warning light – error code (1) Service warning light (11)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos