Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Captiva
    4. : How to replace the cabin filter in the Holden Captiva?

Chevrolet Captiva - Video tutorial

Model: Chevrolet Captiva CG - Years 2006-2018
Part: Cabin air filter
Operation: How to replace the cabin filter in the Holden Captiva?

Replacing the cabin filter of the Holden Captiva is very simple, let's see how to proceed in this tutorial. First of all, let's go to the passenger seat, then open the glove compartment and unscrew the three screws located along the upper inner edge. Then move below the compartment, unscrew the remaining three screws indicated and disengage the drawer from the dashboard by pulling it towards us. At this point we can locate the long rectangular door, open it and extract the old filter. Insert the spare part taking care to respect its direction and only after having cleaned the inside of the housing.


Posted on 21 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Holden Captiva 2006-2016 - Where is the cabin air filter located in the Holden Captiva? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos