Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Holden Captiva?

Model: Chevrolet Captiva CG - Years 2006-2018
Part: Diesel fuel filter

In this tutorial, you will see how to replace the fuel filter on a Holden Captiva, a very simple operation. First, lift the left side of the vehicle with a jack, taking all necessary precautions. Then, locate the two filters in front of the rear wheel and remove the bolt from the water drainage hole. Next, using a 27mm socket wrench, unscrew the first filter, remove it, and install the replacement along with a new gasket. Reassemble everything by following the reverse procedure and repeat the process for the second filter.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Holden Captiva?
How to Replace the Air Filter on a Holden Captiva?
Chevrolet Captiva (2006-2016 / CG) To replace the air filter on a Holden Captiva, open the hood to access the filter box located on the left side of the engine compartment. Loosen the …
How to Replace the Cabin Filter in the Holden Captiva?
How to Replace the Cabin Filter in the Holden Captiva?
Chevrolet Captiva (2006-2018 / CG) Replacing the cabin filter in the Holden Captiva is very simple. First, go to the passenger seat, then open the glove compartment and remove the thre…
How to Replace the Cabin Air Filter in a Holden Captiva?
How to Replace the Cabin Air Filter in a Holden Captiva?
Chevrolet Captiva (2006-2018 / CG) To replace the cabin air filter in a Holden Captiva, open the glove compartment located on the passenger side: this will allow you to detach the reta…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos