Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Captiva
    4. : How to change the air filter on the Holden Captiva.

Chevrolet Captiva - Video tutorial

Model: Chevrolet Captiva CG - Years 2006-2018
Part: Cabin air filter
Operation: How to change the air filter on the Holden Captiva.

If we need to replace the anti-pollution air filter on this car model, in the description below we will find the instructions and procedure to follow for the correct replacement. After sitting in the driver's seat from the passenger side, proceed to open the glove compartment and unscrew the fastening screws on the dashboard. Behind the compartment, we find the compartment containing the filter that we can open by removing the cover and then removing the filter itself and replacing it with the new one. Finally, close the cover and reassemble the compartment.


Posted on 9 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Holden Captiva 2006-2016 - Where is the cabin air filter located in the Holden Captiva? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos