Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Holden Captiva

Model: Chevrolet Captiva CG - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

To replace the air filter on this vehicle DIY, follow the instructions in the video and this description below. First, open the hood and locate the box containing the filter on the right side of the compartment.

Remove the screws securing the cover of the box and disconnect the clamp of the air pressure sensor. Then, lift the cover of the compartment and remove the filter.

Install the new filter after verifying that the replacement specifications match, and place it back in the housing. Close the cover by securing the screws and finally reconnect the clamp of the air pressure sensor.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Holden Captiva?
How to Replace the Air Filter on a Holden Captiva?
Chevrolet Captiva (2006-2016 / CG) To replace the air filter on a Holden Captiva, open the hood to access the filter box located on the left side of the engine compartment. Loosen the …
Replacing the Air Filter on the Holden Captiva
Replacing the Air Filter on the Holden Captiva
Chevrolet Captiva (2006-2016 / CG) At the scheduled maintenance interval for the Holden Captiva, you need to replace the air filter. To do this, open the hood of the engine compartment…
How to Replace the Cabin Air Filter in a Holden Captiva?
How to Replace the Cabin Air Filter in a Holden Captiva?
Chevrolet Captiva (2006-2018 / CG) To replace the cabin air filter in a Holden Captiva, open the glove compartment located on the passenger side: this will allow you to detach the reta…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos