Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Honda ADV 160?

Model: Honda Adv 160
Part: Engine oil

Video tutorial

To change the engine oil of a Honda ADV 160, start by placing the motorcycle on a stable surface, preferably using the centre stand to keep it steady. Ensure the engine is slightly warm, but not too hot, so the oil flows better during draining.

Locate the oil drain plug under the engine, position a suitable container beneath it, and carefully unscrew the plug to let all the used oil drain out. Once the tank is empty, carefully re-screw the drain plug, ensuring it is tightly sealed to prevent leaks.

Now take the new oil suitable for the Honda ADV 160 specifications and remove the top cap of the engine oil tank.

Pour it in carefully using a funnel, frequently checking the level to avoid exceeding the recommended capacity. Finally, replace the tank cap and start the engine for a moment, allowing the oil to circulate; then check the level again and add a small amount if necessary to complete.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How to change the engine oil in the Honda ADV 160 scooter?
How to change the engine oil in the Honda ADV 160 scooter?
Adv 160 In this tutorial, we can see how to replace the engine oil in the Honda ADV 160 scooter, an extremely simple and quick operation. First of all, we wa…
How to Reset the Service Light on a Honda Adv 160
How to Reset the Service Light on a Honda Adv 160
Adv 160 If you own a Honda Adv 160 and want to learn how to manually reset the service light, read this guide carefully and follow the described steps. First…
How to Reset the Service on the Honda ADV 160 Scooter
How to Reset the Service on the Honda ADV 160 Scooter
Adv 160 In this tutorial, we will see how to reset the service on the Honda ADV 160 scooter, an extremely simple and quick operation to perform only after co…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos