Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Vision 110
Part: Shocks

In order to replace the rear shock absorber of the Honda Vision 110, you need to loosen the appropriate screws that secure it to its housing, at the rear of the motorcycle. The screws that secure the shock absorber will be located at the bottom corresponding to the swingarm and at the top corresponding to the rear fender: once both screws have been loosened, you can completely remove the old shock absorber and insert the new one. The new shock absorber must be properly secured so that everything functions correctly.

Posted on 13 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Transmission on a Honda Vision 110
How to Replace the Transmission on a Honda Vision 110
Vision 110 To replace the transmission on a Honda Vision 110, loosen the screws securing the cover located at the rear left of the bike, just below the air filt…
How to replace the belt on a Honda Vision 110?
How to replace the belt on a Honda Vision 110?
Vision 110 You can replace the belt on a Honda Vision 110 by loosening the screws that secure the cover on the left side of the bike, near the rear wheel: once …
How to Replace the Belt on the Honda Vision 110?
How to Replace the Belt on the Honda Vision 110?
Vision 110 To replace the belt on the Honda Vision 110, you need to loosen the bolts securing the cover of the casing located near the rear wheel, on its left s…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos