Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the fuel pump on a Honda Vision 110, open the under-seat compartment to access the rear of the area: here you will find the protection panel that needs to be removed by unscrewing the screws that hold it in place. Once this panel is detached, you will find the fuel pump underneath, which can be removed from its location by loosening the screws and disconnecting the pipes and cables. This way, you can insert the new pump into its place and cover everything with the panel.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the gear oil in the Honda Vision 110?
How do you replace the gear oil in the Honda Vision 110?
Vision 110 It will be possible to replace the gearbox oil of the Honda Vision 110 by loosening the drain plug located at the bottom rear of the transmission hou…
How to Replace the Variator on the Honda Vision 110?
How to Replace the Variator on the Honda Vision 110?
Vision 110 To replace the variator on the Honda Vision 110, loosen the screws securing the transmission cover panel. Once removed, you will be able to access th…
How do you replace the rear shock absorber of the Honda Vision 110?
How do you replace the rear shock absorber of the Honda Vision 110?
Vision 110 In order to replace the rear shock absorber of the Honda Vision 110, you need to loosen the appropriate screws that secure it to its housing, at the …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos