Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In addition to being able to start the engine of the moped in question, like any other moped or motor vehicle, by inserting the key into the cylinder, turning it, holding down the front or rear brake and pressing the Start button, it is also possible to do so directly from the remote control and without the physical presence of the aforementioned key. The video clearly shows how to do it, namely by pressing the button depicting the symbol of the key on the aforementioned remote control, turning the selector to position 1, pulling one of the brake levers and pressing the Start ignition button. Engine started normally.

Posted on 16 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Battery in a Honda SH Key
Honda Sh Replacing the battery in a Honda SH key is a very simple operation, easily done in a few seconds. This procedure is the same for the 125, 150, and 30…
How to adjust the clock on the Honda SH
How to adjust the clock on the Honda SH
Honda Sh Adjusting the clock on the display of the Honda SH 125, 250, and 350 models is a very simple and quick operation to perform independently. To adjust …
How to Reset the Oil Change Light on Honda SH 300
How to Reset the Oil Change Light on Honda SH 300
Honda Sh This video tutorial shows how to reset the oil light on a Honda SH 300 scooter. First, turn on the ignition by inserting the key into the slot and tu…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos