Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to replace the engine oil in the Honda Forza 125 scooter, an extremely simple and quick operation. First of all, make sure that the engine is cool enough, then place a container underneath it, locate the drain hole bolt and unscrew it using a 12mm socket wrench. Let all the oil in the system drain out, then unscrew the filter cap with a 17mm wrench and clean it from any dirt residue. At this point, all that's left to do is reassemble everything and add the necessary amount of oil through the designated upper hole.

Posted on 29 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on the Honda Forza 125.
Resetting the service light on the Honda Forza 125.
Forza 125 Shortly, we will see the instructions necessary to reset the maintenance reminder (service) of the Honda Forza 125 scooter. First, we put the scooter…
Replacement of the rear brake pads of the Honda Forza 125.
Replacement of the rear brake pads of the Honda Forza 125.
Forza 125 Today's steps will show us the process of disassembling and replacing the rear brake pads of the Honda Forza 125 scooter. First, we put the scooter o…
How to disassemble the front brake pads of the Honda Forza 125
How to disassemble the front brake pads of the Honda Forza 125
Forza 125 The following steps will show us the process of disassembling and replacing the front brake pads of the Honda Forza 125 scooter. First, we put the sc…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos