Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spark Plug on a Honda SW-T

Model: Honda Sw T
Part: Spark plugs

Video tutorial

Today, you will learn how to replace the spark plug on your Honda SW-T. First, remove the screws from the plastic cover on the footwell of your scooter to access the compartment housing the front part of the engine, specifically the spark plug. After removing the screws, unlock the clips and take off the cover.

Now, pull the spark plug cap and take a suitable spark plug socket (usually provided with the scooter), insert it onto the spark plug, place a screwdriver into the socket hole, and unscrew the spark plug.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Removing the Transmission of the Honda SW T
Removing the Transmission of the Honda SW T
Sw T In this video tutorial, learn how to remove and replace the transmission of the Honda SW T scooter in simple steps. First, place your scooter on the …
How to Replace the Front Headlight Bulb in a Honda SW-T 600?
How to Replace the Front Headlight Bulb in a Honda SW-T 600?
Sw T To replace the front headlight bulb in a Honda SW-T 600, access the inside of the front fairing, just below the handlebars of the motorcycle. Here, y…
Replacing the Air Filter on a Honda Sw T400
Replacing the Air Filter on a Honda Sw T400
Sw T Replace the original engine air filter on a Honda Sw T400 scooter. Follow this guide to proceed with the replacement. Position the scooter on the cen…

How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?

In this tutorial, you will see how to replace the front headlight bulbs in the Aprilia Tuono V4 1100, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by positioning yourself near the headlight in question, then locate and open the circular cap at the back of it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from its housing. Finally, insert the replacement bulb without touching the glass with bare hands and follow the reverse procedure to reassemble everything.

Watch the video!


by ScegliAuto

More videos