Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Honda Forza 125?

Model: Honda Forza 125
Part: Battery

Video tutorial

Replacing the battery on the Forza 125 with Keyless Go system requires attention, as if the battery is flat, the seat will not open electronically. To access it, remove the left side panel and, using the supplied hex key, turn the emergency release lock under the seat.

The battery is located under the seat. Disconnect the negative terminal first, then the positive.

Remove the old battery and install the new one. (You can find it on eBay with code 395029938639 for £31.50 + £5.00 shipping). Before restarting, the Keyless Go system must be reprogrammed: using the security key (blue) and the coding device (red), enter the 5-digit code (found on the sticker) within 5 seconds of turning on. Press the ignition button the number of times corresponding to each digit, waiting for a flash between each digit.

Once completed, the seat will unlock and the system will reactivate.


Posted on 19 August 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on the Honda Forza 125
How to Replace the Battery on the Honda Forza 125
Forza 125 Today's steps will show you how to remove and replace the battery of the Honda Forza 125 scooter, following the instructions below. First, place the …
How do you replace the spark plug of the Honda Forza 125?
How do you replace the spark plug of the Honda Forza 125?
Forza 125 In order to replace the spark plug of the Honda Forza 125, you need to loosen the screws that fix the side panel of the motorcycle, removing the foot…
How do you replace the exhaust pipe of the Honda Forza 125?
How do you replace the exhaust pipe of the Honda Forza 125?
Forza 125 It will be possible to replace the exhaust of the Honda Forza 125 by loosening the screws that fix the exhaust terminal to its housing: once the corr…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos