Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Cb 1000r
Part:

Today, you will learn how to replace the small chain tensioner on a Honda CB 1000R. Purchase the preloaded tensioner with the appropriate pin and a suitable gasket. Using an 8mm spanner, unscrew the bolt that acts as a cap and release the spring pressing on the slider with a screwdriver (turn clockwise) while you unscrew the two small nuts, as shown in the video. Remove the old tensioner and insert the new one, finally removing the preload pin. To do this, simply extract it with a screwdriver, and the spring will seat against the slider. Ensure you fit the gasket correctly.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Cb 1000r Today, we will see how to remove and replace the headlight bulb on the Honda CB 1000R motorcycle. First, place your motorcycle on a stand and start b…
Cb 1000r This guide provides instructions for removing and replacing the exhaust on a Honda CB 1000R motorcycle. First, place the bike on a stand and begin un…
Cb 1000r Below we will see the instructions that will allow us to disassemble and replace the battery of the Honda CB 1000R motorcycle. First, let's put the m…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos