Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cb 1000r
Part: Wheel

In today's video, you will learn how to remove the front wheel from a Honda CB 1000 R by following these simple steps. First, position the front stand on your bike and start by unscrewing the central bolt of the wheel; then unscrew the bolts of the brake calipers to remove them, as shown in the video. At this point, using a socket spanner, unscrew the fork bolts and slide out the central axle of the wheel; gently remove the wheel by pulling it forward. For reassembly, simply apply the reverse procedure!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Chain Tensioner on a Honda CB 1000R
Replacing the Chain Tensioner on a Honda CB 1000R
Cb 1000r Today, you will learn how to replace the small chain tensioner on a Honda CB 1000R. Purchase the preloaded tensioner with the appropriate pin and a s…
How to Replace the Headlight Bulb on the Honda CB 1000R
How to Replace the Headlight Bulb on the Honda CB 1000R
Cb 1000r Today, we will see how to remove and replace the headlight bulb on the Honda CB 1000R motorcycle. First, place your motorcycle on a stand and start b…
How to Replace the Brake and Clutch Levers on a Honda CB 1000R
How to Replace the Brake and Clutch Levers on a Honda CB 1000R
Cb 1000r Below are the instructions for removing and replacing the brake and clutch levers on the Honda CB 1000R motorcycle. First, place the bike on a stand …

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos