Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sh 150
Part: Brake pads

Today, let’s go through all the steps to remove and replace the front brake pads on a Honda SH 150 scooter. First, unscrew the two fixing screws of the brake caliper using a socket spanner; then remove the brake caliper from the disc and take out the old brake pads by unscrewing the two screws, as shown in the video. At this point, clean the caliper and push back the piston to facilitate the insertion of the new pads; just follow the video to the end for reassembly!

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Brake Pads on SH 150
Replacing Rear Brake Pads on SH 150
Sh 150 Today, you will learn how to replace the brake pads and possibly the disc on the Honda SH 150. First, place your scooter on the centre stand for bett…
How to Change the Bulb and Dashboard of the Honda SH 150
How to Change the Bulb and Dashboard of the Honda SH 150
Sh 150 This guide shows the procedure for removing and replacing the bulb and dashboard for the 2013 Honda SH 150. Models of SH up to 2016 are suitable for …
How to Service a Honda SH 150
How to Service a Honda SH 150
Sh 150 To service the Honda SH 150, first replace the air filter. To access it, remove the bolts securing the cover above the gearbox. Once the cover is rem…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos