Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Pads on SH 150

Model: Honda Sh 150
Part: Brake pads

Video tutorial

Today, you will learn how to replace the brake pads and possibly the disc on the Honda SH 150. First, place your scooter on the centre stand for better convenience. Now, unscrew the 2 bolts that secure the exhaust to the engine and the screw that holds it to the frame.

Now that you have much more working space, proceed to the rear brake caliper. Remove the 2 pins that hold the brake caliper in place and then slide it off (remember to work with the engine cold to avoid burns).

Once the brake caliper is removed, you will have access to the pads, which you can simply remove and replace with new ones.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on Honda SH 150
How to Replace the Front Brake Pads on Honda SH 150
Sh 150 Today, let’s go through all the steps to remove and replace the front brake pads on a Honda SH 150 scooter. First, unscrew the two fixing screws of t…
How to Change the Bulb and Dashboard of the Honda SH 150
How to Change the Bulb and Dashboard of the Honda SH 150
Sh 150 This guide shows the procedure for removing and replacing the bulb and dashboard for the 2013 Honda SH 150. Models of SH up to 2016 are suitable for …
How do you replace the air filter of the Honda SH 150?
How do you replace the air filter of the Honda SH 150?
Sh 150 It will be possible to replace the air filter of the Honda SH 150 by loosening the screws that secure the filter housing, which will be located near …

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos