Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to remove and replace the front headlight bulb on a Honda SH 300 scooter in simple steps. First, remove the mirrors by unscrewing the mirror screws with a spanner; then, using a screwdriver, unscrew the additional screws on the steering cover. At this point, remove the plastic panel along with the front headlight; then, take off the bulb protection cap and disconnect the connector. Finally, turn the retaining clip and replace the bulb with a new one of the correct type (in this case, H4).

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on the Honda SH 300 Scooter
How to Replace the Headlight Bulb on the Honda SH 300 Scooter
Sh 300 As shown in this tutorial, replacing the headlight bulb on the Honda SH 300 scooter is a straightforward task. Before proceeding, ensure the key is n…
Where is the battery located on a Honda SH 300?
Where is the battery located on a Honda SH 300?
Sh 300 The battery of your Honda SH 300 powers the scooter's electrical system, including the starter motor when you need to start the engine. The battery i…
How to Replace the Battery on Honda SH 300
How to Replace the Battery on Honda SH 300
Sh 300 To replace the battery on the Honda SH 300, first lift the seat and unscrew the two screws located at the front of the seat, near the hinge, to remov…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos