Do it yourself
Frequently asked questions about cars and motorcycles
Start by removing the screw on the bracket that holds the top box. Then, open the seat and unscrew the four screws located in the under-seat compartment. Using a cross-head screwdriver, unscrew the screws that secure the top box holder to the under-seat area. Still with the cross-head screwdriver, unscrew the screws that hold the fairing to the frame. There are two on the right side and two on the left side. Next, there are two screws on the scooter's floor that secure a plate covering the battery. At this point, you can remove the seat. Unscrew the screw that connects the two half-fairings. Now, you can unclip the half-fairings from each other and the job is done. Keep all the various screws aside for reassembly.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Sh 125i This guide shows how to remove and replace the battery of the Honda SH 125 scooter, following the instructions below. First, place your scooter on th…
Sh 125i In order to disassemble the steering lock of the Honda SH 125, you need to loosen the screws that secure all the panels that make up the front fairin…
Sh 125i In this video tutorial, you will learn how to replace the engine oil and air filter while performing maintenance on the Honda SH 125i scooter. First,…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos