Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sh 125i
Part:

To remove the fairings of the Honda SH 125, loosen the screws that secure them to their housing; this will allow you to detach them and replace them with new ones. Start by lifting the seat and removing the plastic covers located at the front of the under-seat compartment, then proceed with the cover of the footrest area. This will enable you to detach the fairings that cover the upper part of the front fork, along with those of the shield. The new fairings must be properly secured with the corresponding bolts and rivets.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the steering lock of the Honda SH 125?
How do you remove the steering lock of the Honda SH 125?
Sh 125i In order to disassemble the steering lock of the Honda SH 125, you need to loosen the screws that secure all the panels that make up the front fairin…
How do you replace the transmission of the Honda SH 125?
How do you replace the transmission of the Honda SH 125?
Sh 125i In order to replace the transmission of the Honda SH 125, you need to loosen the screws that fix the protective cover located near the rear wheel, on…
How to Replace the Front Brake Pads on the Honda SH 125
How to Replace the Front Brake Pads on the Honda SH 125
Sh 125i To replace the front brake pads on the Honda SH 125, you need to loosen the bolts that secure the brake caliper to the disc, allowing the caliper to …

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos