Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Forza
Part:

This video shows the entire procedure for replacing the rear-view mirror on a Honda Forza 300. First, fold the mirrors inwards to remove the first two fixing screws. Now, manually unclip the back part of the mirror starting from the outer corner. Unscrew the other three screws and remove the casing. Disconnect the electrical connector of the mirror and extract the remaining bolts. Now you can rotate the rear-view mirror and pull it out. To fit the new one, follow the procedure in reverse.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear View Mirror on a Honda Forza?
How to Replace the Rear View Mirror on a Honda Forza?
Forza To replace the rear view mirror on the Honda Forza, unscrew the screws that secure the front fairing of the bike, just below the windscreen. Once thi…
How to Replace the Rear Brake Pads on a Honda Forza 300
How to Replace the Rear Brake Pads on a Honda Forza 300
Forza To replace the rear brake pads on a Honda Forza 300, first remove the fairing located on the right rear side of the scooter, near the wheel. This wil…
How to Replace the Rear View Mirror on a Honda Forza
How to Replace the Rear View Mirror on a Honda Forza
Forza To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos