Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Forza
    4. : How to replace the windshield in the Honda Forza scooter?

Model: Honda Forza
Part: Windshield
How to replace the windshield in the Honda Forza scooter?

In this tutorial we can see how to replace the windshield on the Honda Forza scooter, an extremely simple and fast operation. First of all, with a cross-tip screwdriver, unscrew the screw located in the lower area, right between the two headlights, then unscrew the other two screws located under the windshield. Subsequently, slightly disengage the two corners of the front fairing, then grasp it and remove it completely. At this we will have gained access to the windshield fixing bolts, which can be unscrewed with a 5mm Allen key. Once the spare part has been mounted, we follow the reverse procedure to reassemble everything.


Posted on 27 December 2022 by ScegliAuto



How to replace the battery in the Honda Forza 300
Forza In today's video you will see how to locate the service battery in the Honda midsize scooter, the Forza 300. First park the scooter on the central st
How to remove the handlebar cover on the Honda Forza 300 scooter?
Forza In this tutorial we can see how to disassemble the handlebar cover on the Honda Forza 300 scooter, an extremely simple and fast operation. First of a
How to reset the service on the Honda Forza 125 scooter?
Forza In this tutorial, we can see how to reset the service on the Honda Forza 125 scooter, an extremely simple and fast operation. Before proceeding, make

How to change the Harley Davidson Street Glide engine oil and relative filter

The guide shows you how to change the Harley Davidson Street Glide engine oil. The first thing to do is to make the motorcycle safe and unscrew the oil tank cap. At this point, from the bottom of the bike, unscrew the drain plug of the oil pan with a 15mm wrench; allow the oil to flow into a suitable container for disposal. From the left side of the bike, start unscrewing the oil filter and place a plastic bag to collect the oil that comes out. Remove the old filter and clean the housing. Lubricate the gasket on the new filter and install a new O-ring on the drain plug and fit the elements in place. Top up the oil to the correct amount and run the engine. Check the oil level again.

Watch the video!


by ScegliAuto

More videos