Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Forza
Part: Brake pads

In this tutorial, see how to replace the front brake pads on the Honda Forza 300 scooter, an extremely simple and quick operation. First, position yourself in front of the brake in question, then loosen the two fastening bolts with a 12mm socket and separate it from the fork. Next, unscrew the lower pin with an 8mm spanner, remove the old pads, and clean any dirt residue present on the entire braking system. At this point, insert the replacements and reassemble everything following the reverse procedure.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Honda Forza 300?
How to Replace the Front Brake Pads on a Honda Forza 300?
Forza To replace the front brake pads on a Honda Forza 300, loosen the screws that secure the brake caliper to the corresponding disc, allowing you to comp…
How to Replace the Rear Brake Pads on a Honda Forza 300
How to Replace the Rear Brake Pads on a Honda Forza 300
Forza To replace the rear brake pads on a Honda Forza 300, first remove the fairing located on the right rear side of the scooter, near the wheel. This wil…
How to Replace the Front Brake Pads on a Honda Forza 125?
How to Replace the Front Brake Pads on a Honda Forza 125?
Forza To replace the front brake pads on a Honda Forza 125, loosen the bolt that secures the brake caliper to the corresponding disc, allowing the caliper …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos