Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Forza
Part: Brake pads

To replace the rear brake pads on a Honda Forza, remove the fairing located on the right rear of the bike, near the wheel. This will allow access to the underlying components, including the brake caliper, which can be detached by loosening the two fixing bolts. Once the caliper is removed, extract the pads inside and replace them with new spare parts. After replacement, refit the caliper with the bolts and cover everything with the fairing.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the Honda Forza 300 Scooter
How to Replace the Front Brake Pads on the Honda Forza 300 Scooter
Forza In this tutorial, see how to replace the front brake pads on the Honda Forza 300 scooter, an extremely simple and quick operation. First, position yo…
How to Replace the Rear Brake Pads on a Honda Forza 300
How to Replace the Rear Brake Pads on a Honda Forza 300
Forza To replace the rear brake pads on a Honda Forza 300, first remove the fairing located on the right rear side of the scooter, near the wheel. This wil…
How to Replace the Front Brake Pads on a Honda Forza 125?
How to Replace the Front Brake Pads on a Honda Forza 125?
Forza To replace the front brake pads on a Honda Forza 125, loosen the bolt that secures the brake caliper to the corresponding disc, allowing the caliper …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos