Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Forza
Part:

In this tutorial, you will see how to remove the handlebar cover on the Honda Forza 300 scooter, a very simple and quick operation. First, grasp the central cover, then pull it upwards and unclip it. Next, unscrew the bolt just released with a 10mm socket spanner, continue with the side screws using a flat-head screwdriver, and separate the upper cover. To remove the lower cover, simply unscrew the additional indicated screws, and to reassemble everything, just follow the reverse procedure.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the Honda Forza 300 Scooter
How to Replace the Front Brake Pads on the Honda Forza 300 Scooter
Forza In this tutorial, see how to replace the front brake pads on the Honda Forza 300 scooter, an extremely simple and quick operation. First, position yo…
How to Replace the Battery in the Honda Forza 300
How to Replace the Battery in the Honda Forza 300
Forza In today's video, you will see how to locate the service battery in the midsize Honda scooter, the Forza 300. First, park the scooter on the centre s…
How to Reset the Maintenance Light on the Honda Forza 300
How to Reset the Maintenance Light on the Honda Forza 300
Forza This guide shows how to reset the warning light for reaching the maximum maintenance limit on the Honda Forza 300 scooter. With the instrument panel …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos