Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Maintenance Light on the Honda Forza 300

Model: Honda Forza
Part: Warning light – error code

Video tutorial

This guide shows how to reset the warning light for reaching the maximum maintenance limit on the Honda Forza 300 scooter. With the instrument panel off, press the 'Info A' and 'Info B' buttons located on the left side of the handlebars simultaneously; then, turn on the ignition.

The oil change light will start to flash. To reset the light, press the 'Info B' button twice to make the light disappear.

Turn off the ignition and turn it back on to check that the light has been reset correctly. Also, check the engine oil level.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Forza To reset the oil light on the Honda Forza 300, follow this procedure: first, turn off the engine. Once the engine is off, press and hold the right bu…
Forza To replace the rear brake pads on a Honda Forza 300, first remove the fairing located on the right rear side of the scooter, near the wheel. This wil…
Forza This video shows the entire procedure for replacing the rear-view mirror on a Honda Forza 300. First, fold the mirrors inwards to remove the first tw…

How to Change the Engine Oil of the Husqvarna 701?

To change the engine oil of the Husqvarna 701, you need to loosen the drain plug of the oil tank located at the bottom centre of the bike: by unscrewing this plug, you will be able to let all the used oil flow into a suitably positioned container. Once the oil has completely drained out, remove the filter located on the left front side of the bike and replace it with a new one. You can then top up the oil through the designated breather next to the casing on the right side of the bike.

Watch the video!


by ScegliAuto

More videos