Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Forza
Part: Shocks

To replace the rear shock absorber on a Honda Forza, you need to loosen the screws that secure it to its housing: you will need to loosen the one at the top located just beneath the corresponding fairing and the one at the bottom located near the swingarm. Once the screws are loosened, you can completely remove the shock absorber from its housing, allowing you to insert the new replacement part: this should be secured in place with the appropriate screws, ensuring everything functions correctly.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Honda Forza 300
How to Replace the Rear Brake Pads on a Honda Forza 300
Forza To replace the rear brake pads on a Honda Forza 300, first remove the fairing located on the right rear side of the scooter, near the wheel. This wil…
How to Replace the Rear View Mirror on a Honda Forza
How to Replace the Rear View Mirror on a Honda Forza
Forza To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will …
How to Replace the Rear Brake Pads on a Honda Forza?
How to Replace the Rear Brake Pads on a Honda Forza?
Forza To replace the rear brake pads on a Honda Forza, remove the fairing located on the right rear of the bike, near the wheel. This will allow access to …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos