Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Pcx 125
Part: Clock

To set the clock on the Honda PCX 125, you need to turn the ignition key inside the ignition switch to turn on the instrument panel. Once the instrument panel is turned on, you can press both buttons located on its sides, and you will notice that the hours will start flashing. At this point, the hours can be adjusted by repeatedly pressing the right button; after adjusting the hours, you should press both buttons again, and you will notice that the minutes will start flashing and can be adjusted using the same procedure.

Posted on 8 February 2024 by ScegliAuto

Video tutorial

Related tutorials

Pcx 125 To set the clock on the Honda PCX 125, you need to turn on the instrument panel by inserting the ignition key into the corresponding block: once the …
Pcx 125 Today we will explain how to set the clock on a Honda motorcycle. To adjust the clock on the instrument panel of the Honda PCX 125, we need to turn o…
Pcx 125 To set the clock on the Honda PCX 125, you need to turn on the instrument panel by turning the key, and then you will need to hold down the SEL and S…

How to Update the Time on a Honda CBR 600 RR

In this video, we will see how to update the clock on the Honda CBR 600RR: turn on the ignition by turning the key to position one, then use the two buttons located on the left side of the dial. Press and hold both buttons for a few seconds to enter the mode that allows you to change the time, which will be indicated by the time, located at the bottom right of the dial, just below the total mileage, starting to flash. Change the hour using the two buttons: the upper button will allow you to change the hour, and pressing it will increment the number by one, while holding it will speed up the change. Pressing the upper button will switch to minutes, and repeat the operation. Confirm with the upper button.

Watch the video!


by ScegliAuto

More videos