Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to replace the coolant in the Honda PCX 150 scooter, a very simple and quick operation. First of all, we wait for the engine to be completely cold, then we remove both the floorboard and the left lower fairing. We then remove the radiator cover, unscrew the drain hole bolt using a Torx T40 key, and let all the liquid in the system come out. At this point, all that remains is to reassemble everything and pour the necessary amount of liquid through the top hole.

Posted on 15 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Honda PCX 150 Scooter?
How to Change the Engine Oil on the Honda PCX 150 Scooter?
Pcx 150 Changing the engine oil on the Honda PCX 150 scooter, as shown in this tutorial, is a straightforward and quick task. First, ensure the engine is coo…
How to change the transmission oil on the Honda PCX 150 scooter?
How to change the transmission oil on the Honda PCX 150 scooter?
Pcx 150 In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the …
How to replace the front brake pads on the Honda PCX 150 scooter?
How to replace the front brake pads on the Honda PCX 150 scooter?
Pcx 150 In this tutorial, see how to replace the front brake pads on the Honda PCX 150 scooter, a very simple and quick operation. First, position yourself i…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos