Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace or clean the EGR valve of the Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012
Part: EGR valve

The instructions provided in this guide will show us the process of replacing and cleaning the EGR valve of the Honda CR-V. First, we open the hood of the vehicle and start locating the EGR valve, located at the top right in the engine compartment; then we unscrew the fixing screws found on the sides, using a socket wrench, and disconnect the electrical connector to remove it, as shown in the video. Now we clean the EGR valve with specific products or replace it if necessary; finally, we correctly reassemble the EGR valve!

Posted on 13 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the EGR Valve on the Honda CR-V 2.2 Diesel
Removing the EGR Valve on the Honda CR-V 2.2 Diesel
Honda CR-V (2007-2012 / MK 3) In this video tutorial, you will see how to remove and replace (or clean) the EGR valve on the Honda CR-V third generation, with a 2.2 Diesel engine.…
How to Remove the Solenoid Valve from a Honda CR-V
How to Remove the Solenoid Valve from a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Learn how to remove and replace the solenoid purge valve on a Honda CR-V. Open the bonnet, lift it, and secure it. Use a socket to undo the fastening…
Replacing the Solenoid on Honda CR-V
Replacing the Solenoid on Honda CR-V
Honda CR-V (2002-2007 / MK 2) Replacing the solenoid purge valve on a Honda CR-V? Open the bonnet, lift it, and secure it. You can work by removing the front wheel. Undo the secur…

Other guides you may be interested in

How to Program the Remote for the Peugeot 206

Here are the main instructions for programming the key remote of the Peugeot 206. First, get in the vehicle and press and hold the clutch pedal; then turn the ignition key to be programmed, thus powering up the instrument cluster, as shown in the video. At this point, hold down the door lock button for about ten seconds, then turn off the ignition and press both the lock and unlock buttons; this will associate the control unit with the new remote!

Watch the video!


by ScegliAuto

More videos