Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the sun visor on a Honda Accord

Model: Honda Accord MK 9 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

In today's tutorial, we can see the entire procedure for replacing the sun visor on a Honda Accord, ninth generation model. The procedure is very simple to perform and we can do it independently and in just a few minutes, but let's see how to proceed immediately.

First, lower the visor and open it by detaching it from the hook towards the window of the door (to the left if it is the driver's side visor or to the right if it is the passenger's side visor). After that, rotate the small screw located at the base of the visor to the left and then detach the visor and remove the wiring, finally install a new visor following the reverse procedure.


Posted on 18 December 2024 by ScegliAuto


Related tutorials

Replacing the Sun Visor on the Honda Accord
Replacing the Sun Visor on the Honda Accord
Honda Accord (2008-2013 / MK 8) In this guide, find instructions on how to remove and replace the sun visor on the Honda Accord by following these simple and quick steps. First, get…
How to Set the Clock on the Honda Accord?
How to Set the Clock on the Honda Accord?
Honda Accord (2002-2007 / MK 7) To modify the clock on the Honda Accord, insert the ignition key into the corresponding lock and turn it to activate the instrument panel. Once the p…
How to Change the Time on the Honda Accord
How to Change the Time on the Honda Accord
Honda Accord (2008-2013 / MK 8) Today's main steps will show how to change the time on the Honda Accord, following the instructions below. First, get in the vehicle and turn on the …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos