Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Wing Mirror

Model: Honda Civic MK 7 - Years 2001-2006
Part: Side mirror

First, detach the triangular plastic cover located inside the door, directly opposite the external wing mirror. Then disconnect the connector attached to the mirror and unscrew the mounting nuts of the mirror itself: to remove the mirror, press the plastic tabs around the central connector. Finally, fit the new mirror, tighten the three mounting nuts, reconnect the connector, and reattach the triangular plastic cover ensuring it clips back in place correctly.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Glass from the External Rear-View Mirror of the Honda Civic
How to Remove the Glass from the External Rear-View Mirror of the Honda Civic
Honda Civic (2001-2006 / MK 7) In today's video, follow the steps to dismantle and replace the glass of the external rear-view mirror of the Honda Civic. First, position yourself a…
How to Repair the External Mirror of the Honda Civic 8
How to Repair the External Mirror of the Honda Civic 8
Honda Civic (2006-2012 / MK 8) This video shows how to repair the external rear-view mirror of the Honda Civic 8. This tutorial is useful if the mirror's closure starts to malfunct…
How to Dismantle the Rear-View Mirror of the Honda Civic
How to Dismantle the Rear-View Mirror of the Honda Civic
Honda Civic (2006-2012 / MK 8) Dismantling the rear-view mirror of the Civic? Remove the door panel to disconnect the electrical connector attached to the mirror. Use a lever to re…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos