Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to remove the side door panel on Honda Hrv

Model: Honda Hr V MK 2, RU - Years 2016-2022
Part: Door panel

We perform the disassembly of the left front door panel on a Honda Hrv. We disconnect the battery terminals in the engine compartment, with a screwdriver we unscrew the screws located in the space of the upper lever of the door opening and the screws in the handle (after removing the plastic). We remove the plastic covering near the window, unscrew the screws left on the door panel and remove the clips fastening it. Finally, remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door.


Posted on 28 November 2023 by ScegliAuto



How to reset the tire warning light on Honda HRV 2020
Honda Hr V (2016-2022 / MK 2, RU) In this very short video tutorial we can see how to reset the tire warning light on a Honda HRV, model produced from 2016 to 2020. Let's start by tur
How to reset the service light on a Honda HRV.
Honda Hr V (2016-2022 / MK 2, RU) In today's video tutorial, we are shown how to reset the service light, which indicates the remaining life of the engine oil, on a second-generation
How to reset the service light on a Honda Hrv.
Honda Hr V (2016-2022 / MK 2, RU) If we need to proceed with changing the engine oil and its filter, at the end of the procedure we will then need to reset the service light. In the f

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos