Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the power window switch panel on the door of the Honda HR-V

Model: Honda Hr V RU, MK 2 - Years 2016-2022
Part: Power window switch

The following steps will show us how to disassemble and replace the window switch panel of the Honda HR-V. First, we open the front door of the vehicle and start unscrewing all the fastening screws of the door panel, located on the sides and on the handle; we pry the sides of the panel to detach and remove it, as shown in the video. At this point, we disconnect the electrical connector of the window switch panel, in order to detach and remove it; we replace the single button or the entire panel, connecting it and finally reassembling the inner panel!

Posted on 1 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Honda HR-V
Disassembly of the front door panel of the Honda HR-V
Honda Hr V (2021-2026 / RV4, RV3, RV6, RV5) Below we will see the instructions on how to disassemble the front door panel of the Honda HR-V. First, we open the front door and start removing the…
How to disassemble the front door panel of the Honda HR-V
How to disassemble the front door panel of the Honda HR-V
Honda Hr V (2021-2026 / RV4, RV3, RV6, RV5) Following this brief procedure, we will see how to disassemble the front door panel of the Honda HR-V. First, open the front door of the vehicle and …
Removing the Left Door Panel on Honda HR-V
Removing the Left Door Panel on Honda HR-V
Honda Hr V (1999-2005 / GH, MK 1) Is the left door panel of a Honda HR-V due for replacement? Here’s how to remove it. Unscrew the screws located in the space of the upper door releas…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos